Gigabyte GA-7VT600 - Uart Mode Select; Parallel Port Mode

- 42 -GA-7VT600(-L) Motherboard
English
))
))
) UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal Set onboard I/O chip UART to Normal Mode. (Default Value)
IrDA Set onboard I/O chip UART to IrDA Mode.
ASKIR Set onboard I/O chip UART to ASKIR Mode.
SCR Set onboard I/O chip as Smart Card interface.
))
))
) Parallel Port Mode
0This feature allows you to connect with an advanced print via the port mode it supports.
SPP Using Parallel port as Standard Parallel Port using IRQ7. (Default Value)
EPP Using Parallel port as Enhanced Parallel Port IRQ5.
ECP Using Parallel port as Extended Capabilities Port using IRQ7.
ECP+EPP Using Parallel port as ECP & EPP mode.
))
))
) Game Port Address
Disabled Disabled this function.
201 Set Game Port Address to 201. (Default Value)
209 Set Game Port Address to 209.
))
))
) Midi Port Address
Disabled Disabled this function. (Default Value)
300 Set Midi Port Address to 300.
330 Set Midi Port Address to 330.
))
))
) Midi Port IRQ
5 Set 5 for Midi Port IRQ.
10 Set 10 for Midi Port IRQ.(Default value)