Gigabyte GA-880GM-UD2H - Product Specifications

Hardware Installation - 10 -
1-2 Product Specications
CPU

Support for AM3 processors:
AMD Phenom
™
II processor/ AMD Athlon
™
II processor
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport Bus

5200 MT/s
Chipset

 North Bridge: AMD 880G


 South Bridge: AMD SB710
Memory

4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
(Note 1)

Dual channel memory architecture

Support for DDR3 1800(O.C.)/1333/1066 MHz memory modules
(Note 2)


 (Go to GIGABYTE's website for the latest supported memory speeds and
memory modules.)
Onboard Graphics

Integrated in the North Bridge:
- 1 x D-Sub port
- 1 x DVI-D port
(Note 3) (Note 4)
- 1 x HDMI port
(Note 4)
Audio
   
Realtek ALC892 codec

High Denition Audio

2/4/5.1/7.1-channel

Support for Dolby
®
Home Theater
j
    
Support for S/PDIF In/Out

Support for CD In
LAN

1 x Realtek RTL8111D chip (10/100/1000 Mbit)
Expansion Slots

1 x PCI Express x16 slot, running at x16

1 x PCI Express x1 slot
(All PCI Express slots conform to the PCI Express 2.0 standard.)

2 x PCI slots
Multi-Graphics

Support for ATI Hybrid CrossFireX
™
technology
Technology
Storage Interface

South Bridge:
- 5 x SATA 3Gb/s connectors supporting up to 5 SATA 3Gb/s devices
- 1 x eSATA 3Gb/s connector on the back panel supporting up to 1 SATA 3Gb/s
device
- Support for SATA RAID 0, RAID 1, RAID 10, and JBOD
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices

iTE IT8720 chip:
- 1 x oppy disk drive connector supporting up to 1 oppy disk drive
j
Only for GA-880GM-UD2H
"*" The GA-880GM-UD2H adopts All-Solid Capacitor design.