Gigabyte GA-890FXA-UD5 - Page 94

Appendix - 94 -
For the GIGABYTE SATA2/JMicron JMB362:
Insert the oppy disk containing the SATA RAID/AHCI driver and press <S>. Then a controller menu similar
to Figure 3 below will appear. Select RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32) and press
<Enter>.
Step 3:
On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-
ceed with the Windows XP installation.
Figure 3
Windows Setup
  YouhavechosentocongureaSCSIAdapterforusewithWindows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select F3=Exit
RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32)