Gigabyte GA-8LD533 - Front Usb Connector

- 19 - Hardware Installation Process
English
13) AUX_IN ( AUX In Connector)
AUX-R
AUX-L
GND
11)F_AUDIO (F_AUDIO Connector)
 If you want to use Front Audio connector, you
must remove 5-6, 9-10 Jumper.
In order to utilize the front audio header, your
chassis must have front audio connector. Also
please make sure the pin assigment on the cable
is the same as the pin assigment on the MB
header. To find out if the chassis you are buying
support front audio connector, please contact
your dealer.
1
GND
Reserved
MIC
Rear Audio (R)
Rear Audio (L)
Front Audio (R)
Front Audio (L)
POWER
REF
1
 Connect other device(such as PCI TV Tunner
audio out) to the connector.
12) CD_IN (CD IN)
1
CD-R
CD-L
GND
 Connect CD-ROM or DVD-ROM audio out
to the connector.
 Be careful with the polarity of the front panel
USB connector. Check the pin assignment while
you connect the front panel USB cable. Please
contact your nearest dealer for optional front panel
USB cable.
14) F_USB1/F_USB2
(Front USB Connector)
USB Dy-
USB Dy+
Power
USB Dx-
USB Dx+
1
USB Over Current
Power
GND
GND