Gigabyte GA-8ST800 - Ac97 Audio; Usb Controller; Usb Legacy Support

- 32 -
GA-8ST800 Series Motherboard
English
IDE2 Conductor Cable
Auto Will be automatically detected by BIOS. (Default Value)
ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable is compatible with ATA66/100/133).
ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device
and cable is compatible with ATA33).
On-Chip Primary PCI IDE
Disabled Disable onboard 1st channel IDE port.
!Enabled Enable onboard 1st channel IDE port. (Default value)
On-Chip Secondary PCI IDE
Disabled Disable onboard 2nd channel IDE port.
Enabled Enable onboard 2nd channel IDE port. (Default value)
AC97 Audio
Enabled Enable auto detect onboard AC'97 audio. (Default value)
Disabled Disable this function.
USB Controller
Disable this function if you are not using onboard USB feature.
Disabled Disable USB Controller.
Enabled Enable USB Controller. (Default value)
USB Legacy Support
When USB keyboard or mouse is installed, please set at Enabled.
Disabled Disable USB keyboard or mouse Support. (Default value)
!Enabled Enable USB keyboard or mouse support.
Onboard LAN device*
Enabled Enable Onboard Lan Chip function. (Default Value)
Disabled Disable this function.
* Only for GA-8ST800-L.