Gigabyte GA-8VM800PMD-775 - Page 43

BIOS Setup- 43 -
English
DRAM Clock
Please set DRAM Clock according to your requirement.
If you use a DDR II 333 DRAM module, please set DRAM Clock to 166.
If you use a DDR II 400 DRAM module, please set DRAM Clock to 200.
If you use a DDR II 533 DRAM module, please set DRAM Clock to 266.
AGP OverVoltage Control
Auto BIOS will automatically detect AGP voltage. (Default value)
+0.1V Set AGP OverVoltage Control to +0.1V.
+0.2V Set AGP OverVoltage Control to +0.2V.
DIMM OverVoltage Control
Auto BIOS will automatically detect DIMM voltage. (Default value)
+0.1V Set DIMM OverVoltage Control to +0.1V.
+0.2V Set DIMM OverVoltage Control to +0.2V.