GA-8VM800PMD-775 Motherboard - 82 -
English
SPDIF Output Device (Optional Device)
STEP 3:
Connect SPDIF to the SPDIF decoder.
Secure the metal bracket of the SPDIF Output
device to the chassis back panel with a screw.
Connect the SPDIF device cable to the SPDIF_IO
connector on the motherboard.
A "SPDIF output" connector is available on the
motherboard. Cable with rear bracket could link to
the "SPDIF output" connector (As picture.) For the
further linkage to decoder, rear bracket provides
coaxial cable and Fiber connecting port.
STEP 1:
STEP 2:
To Next Page
Loading...
