- 75 - Appendix
English
or
Select Realtek HD Audio Input in the Mixer devie list
Recording Control
(Note)
If you cannot find the volume control options you need
in Master Volume, go to the Options menu and then
choose Properties. Select the volume control op-
tions you wish to show and click OK to complete.
Step 4:
To hear the sound being recorded during the recording
process when using the microphone function on the
front panel, do not select the Mute check box under
Front Pink In or Front Green In in Master Volume.
It is recommended that you set the volume at a
middle level.
To hear the sound being recorded during the recording
process when using the microphone function on the
back panel, do not select the Mute check box under
Rear Pink In in Master Volume. It is recommended
that you set the volume at its middle level.
Step 5:
Next, while in Master Volume, go to Options and
click Properties. In the Mixer device list, select
Realtek HD Audio Input. Then set the recording
sound level properly. Do NOT mute the recording
sound, or you will not hear any sound when playing
back the recording you just made.
To Next Page
Loading...
