Need help?Do you have a question about the Gigabyte GA-B75N and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Memory voltage | 1.5 V |
| Memory channels | Dual-channel |
| Number of memory slots | 2 |
| Supported memory types | DDR3-SDRAM |
| Maximum internal memory | 16 GB |
| Supported memory clock speeds | 800, 1066, 1333, 1600 MHz |
| Processor socket | LGA 1155 (Socket H2) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Celeron, Intel Pentium |
| USB 2.0 connectors | 1 |
| Number of Parallel ATA connectors | 0 |
| USB 2.0 ports quantity | 4 |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | Intel B75 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | mini ITX |
| Supported storage drive interfaces | SATA II, SATA III |
| On-board graphics card | No |
| Parallel processing technology support | Not supported |
| PCI Express slots version | 3.0 |
| Networking features | Gigabit Ethernet |
| BIOS type | EFI AMI |
| ACPI version | 2.0a |
| BIOS memory size | 128 Mbit |
Weight and Dimensions| Width | 170 mm |
|---|
Essential safety and handling guidelines before installing hardware.
Step-by-step guide for installing the CPU.
Describes navigation and options in the standard BIOS menu.
Menu for CPU/memory configuration and system settings.
Menus for boot options, CPU features, and peripheral configuration.
Menus for power-saving functions and saving BIOS changes.
Detailed settings for CPU and memory frequencies.
Allows adjustment of CPU clock ratio and displays frequency.
Advanced settings for CPU cores and turbo boost.
Details on Hyper-Threading, power saving, thermal monitor, EIST, XMP, memory multiplier.
Allows selection of performance levels and DRAM timing modes.
Detailed memory timing settings for each channel.
Allows setting various system voltages.
Controls CPU and system fan speeds based on temperature.
Specifies the system boot order.
Sets boot order for specific device types.
Selects boot mode (UEFI/Legacy) and configures PXE support.
Sets administrator and user passwords for BIOS access.
Steps for installing motherboard drivers from the disk.
To Next Page