Need help?Do you have a question about the Gigabyte GA-B75M-D3V and is the answer not in the manual?
General| ECC | No |
|---|---|
| Non-ECC | Yes |
| Memory voltage | 1.5 V |
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 2 |
| Supported memory types | DDR3-SDRAM |
| Maximum internal memory | 16 GB |
| Supported memory clock speeds | 1066, 1333, 1600 MHz |
| Supported memory module capacities | 1GB, 2GB, 4GB, 8GB |
| System bus rate | 5 GT/s |
| Processor socket | LGA 1155 (Socket H2) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Core i3, Intel Core i5, Intel Core i7 |
| Maximum number of SMP processors | 1 |
| Number of SATA II connectors | 5 |
| Number of Parallel ATA connectors | 0 |
| Headphone outputs | 3 |
| USB 2.0 ports quantity | 4 |
| Audio chip | Realtek ALC887 |
| Cooling type | Passive |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | Intel B75 |
| PC health monitoring | CPU, FAN, Temperature |
| Audio output channels | 7.1 channels |
| Motherboard form factor | micro ATX |
| Supported storage drive interfaces | SATA II, SATA III |
| Cables included | SATA |
| Graphics card | HD Graphics |
| OpenGL version | 3.2 |
| DirectX version | 11 |
| Maximum graphics card memory | 1696 MB |
| Parallel processing technology support | Not supported |
| PCI Express slots version | 3.0 |
| LAN controller | - |
| Networking features | 10/100/1000 Mbit/sec |
| Ethernet interface type | Gigabit Ethernet |
| BIOS type | EFI AMI |
| ACPI version | 2.0 |
| BIOS memory size | 64 Mbit |
Weight and Dimensions| Depth | 174 mm |
|---|---|
| Width | 244 mm |
Statements confirming adherence to FCC and CE regulations.
Legal notices and usage restrictions for the manual.
Guide to locating the motherboard's revision number.
Visual representation of motherboard components and connectors.
Functional overview of motherboard components and data flow.
Safety and handling guidelines before installation.
Technical details of the motherboard components.
Explanation of external ports and interfaces.
Description of internal headers for system components.
Details on ATX and ATX_12V power connectors.
Information on CPU/System fan headers and CMOS battery.
Details on SATA3 and SATA2 connectors.
Connection details for chassis front panel switches and LEDs.
Connections for front panel audio and serial ports.
Details for USB 3.0/2.0 and USB 2.0/1.1 headers.
Procedure for clearing CMOS settings to factory defaults.
The initial screen displayed when entering BIOS setup.
Navigation and key sections within the BIOS setup utility.
Monitor system frequencies, voltages, and temperatures.
Adjust CPU clock ratio, frequency, and internal graphics clock.
Configure CPU core ratio, Turbo Boost, and power saving features.
Configure XMP profiles, memory multiplier, and performance levels.
Fine-tune DRAM timings for memory channels.
Monitor system voltages, temperatures, and fan speeds.
Configure language, date, time, and access level.
Settings for boot order, security, and virtualization.
Configure administrator/user passwords and virtualization technologies.
Settings for onboard devices like SATA, USB, and LAN.
Configure USB 3.0 (xHCI) and SATA modes (AHCI/IDE).
Configure onboard graphics, serial, and parallel ports.
Configure system power states and keyboard wake-up.
Settings for resume by alarm, ErP, and standby modes.
Options for saving changes, loading defaults, and exiting BIOS.
Procedure for installing motherboard drivers using the provided disk.
Compliance with hazardous substance and waste directives.
Company address, phone, and website for support.
To Next Page