Gigabyte GA-B75M-D3V - Advanced Power Settings

- 36 -
Resume by Alarm &
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specic time on each day or on a specic day in a month. 
Wake up hour/minute/second: Set the time at which the system will be powered on automatically. 
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
ErP &
Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default:
Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake
up, power on by mouse, power on by keyboard, and wake on LAN.
High Precision Event Timer &
(Note)
Enables or disables High Precision Event Timer (HPET) for Windows 7 operating system. (Default:
Enabled)
Soft-Off by PWR-BTTN &
Congures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off Press the power button and then the system will be turned off instantly. (Default) 
Delay 4 Sec Press and hold the power button for 4 seconds to turn off the system. If the power 
button is pressed for less than 4 seconds, the system will enter suspend mode.
Internal Graphics Standby Mode &
Allows you to determine whether to let the onboard graphics enter standby mode to decrease power
consumption. (Default: Enabled)
Internal Graphics Deep Standby Mode &
Allows you to determine whether to let the onboard graphics enter deeper standby mode. (Default:
Enabled)
(Note) Supported on Windows 7 operating system only.