Gigabyte GA-B75M-D3V - Advanced Memory Settings

- 26 -
ExtremeMemoryProle(X.M.P.) &
(Note)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default) 
Prole1 Uses Prole 1 settings. 
Prole2 
(Note)
Uses Prole 2 settings.
System Memory Multiplier &
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
Memory Frequency (MHz) &
The rst memory frequency value is the normal operating frequency of the memory being used; the second
is the memory frequency that is automatically adjusted according to the System Memory Multiplier
settings.
Advanced Memory Settings `
ExtremeMemoryProle(X.M.P.) &
(Note)
, System Memory Multiplier (SPD), Memory
Frequency(MHz)
The settings under the three items above are synchronous to those under the same items on the Advanced
Frequency Settings menu.
Performance Enhance &
Allows the system to operate at three different performance levels.
Normal Lets the system operate at its basic performance level. 
Turbo Lets the system operate at its good performance level. (Default) 
Extreme Lets the system operate at its best performance level. 
DRAM Timing Selectable (SPD) &
Quick and Expert allows the Channel Interleaving, Rank Interleaving, and memory timing settings below
to be congurable. Options are: Auto (default), Quick, Expert.
(Note) This item is present only when you install a CPU and a memory module that support this feature.