Gigabyte GA-D425TUD - Page 71

- 71 -
Appendix
• Rebuilding in the operating system
MakesuretheGIGABYTESATA2/JMicronJMB363SATAcontrollerdriverhasbeeninstalledfromthemoth-
erboarddriverdisk.LaunchtheGIGABYTERAIDCONFIGURERfromAll Programs in the Start menu.
Step 1:
IntheGIGABYTERAIDCONFIGURERscreen,
right-click on the array to be rebuilt in the RAID
LIST block. Select Rebuild Raid. (Or click the
Rebuild icon in the tool bar.)
Step 3:
Select a drive to rebuild the array and click Next.
Step 2:
When the Rebuilding RAID Wizard appears,
click Next.
Step 4:
Click Finish to start the RAID rebuilding process.
Step 6:
Whennished,restartyoursystem.
Step 5:
The rebuilding progress is displayed at the
bottom of the screen.