Gigabyte GA-E2500N - Page 24

- 24 -
` GFXConguration
& Integrated Graphics
Enables or disables the onboard graphics function.
Auto The BIOS will automatically enable or disable the onboard graphics depending on the
graphics card being installed. (Default)
Disabled Disables the onboard graphics.
Force Always activates the onboard graphics, whether or not a PCI Express card is installed.
& UMAFrameBufferSize
 ThisitemiscongurableonlywhenIntegrated Graphics is set toForce. Frame buffer size is the total
amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will
use only this memory for display. Options are: 32M, 64M, 128M, 256M (default), 512M, 1G, 2G.
& Gnb HD Audio
Enables or disables the onboard HDMI audio function. (Default: Enabled)
` SATAConguration
& OnChipSATAChannel
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChipSATAType
 AllowsyoutodecidewhethertoconguretheSATAcontrollerintegratedintheChipsettoAHCImode.
NativeIDECongurestheSATAcontrollertoIDEmode.
AHCI  CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface(AHCI)
isaninterfacespecicationthatallowsthestoragedrivertoenableadvancedSerialATA
features such as Native Command Queuing and hot plug. (Default)
& PORT0HotPlug~PORT1HotPlug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& SATAPoweronPORT0~SATAPoweronPORT1
Enables or disables each SATA port. (Default: Enabled)
` SuperIOConguration
 ThissectionprovidesinformationonthesuperI/Ochipandallowsyoutoconguretheserialportand
parallel port.
& Serial Port A/B
Enables or disables the onboard serial port. (Default: Enabled)
& Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
& Device Mode
 ThisitemiscongurableonlywhenParallel Port is set to Enabled. Selects an operating mode for the
onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP Mode (Enhanced
Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode.(Default)