Gigabyte GA-EP43T-USB3 - Init Display First

- 47 - BIOS Setup
Delay For HDD (Secs)
Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up. The
adjustable range is from 0 to 15 seconds. (Default: 0)
Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays
normal POST message. (Default: Enabled)
Backup BIOS Image to HDD
Allows the system to copy the BIOS image le to the hard drive. If the system BIOS is corrupted, it will
be recovered from this image le. (Default: Enabled)
Init Display First
Species the rst initiation of the monitor display from the installed PCI graphics card or the PCI Express
graphics card.
PCI Sets the PCI graphics card as the rst display. (Default)
PEG Sets the PCI Express graphics card as the rst display.