- 20 -
&
enabled.
&
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
&
This value is automatically adjusted according to the BCLK/PCIe Clock Control and System Memory
Multiplier settings.
` Advanced Memory Settings
&
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& Memory Timing Mode
Manual and Advanced Manual allows the Channel Interleaving, Rank Interleaving, and memory timing
&
When using a non-XMP memory module or is set to Disabled, the value
is set to
or , the value is displayed according to the SPD data on the XMP memory.
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
` Channel A/B Memory Sub Timings
This sub-menu provides memory timing settings for each channel of memory. This sub-menu provides memory
Memory Timing Mode is set to Manual or Advanced Manual. Note: Your system may become unstable or fail
to boot after you make changes on the memory timings. If this occurs, please reset the board to default values
` Advanced Voltage Settings
This sub-menu allows you to set CPU, chipset and memory voltages.
& CPU core Control
Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS
& APM
To Next Page
Loading...
