Gigabyte GA-F2A75-D3H - User Manual

GA-F2A75-D3H
User's Manual
Rev. 1002
12ME-F275D3H-1002R

Gigabyte GA-F2A75-D3H Specifications

General

Socket	FM2
Chipset	AMD A75
Form Factor	ATX
Memory Slots	4
Memory Type	DDR3
Max Memory	64 GB
Storage	6 x SATA 6Gb/s
Video Outputs	HDMI, DVI, VGA
Audio	Realtek ALC887
LAN	Realtek GbE
RAID Support	RAID 0, RAID 1, RAID 10
Expansion Slots	1 x PCI Express x16, 2 x PCI
USB Ports	4 x USB 3.0, 8 x USB 2.0

Summary

GA-F2 A75-D3 H Motherboard Layout

GA-F2 A75-D3 H Motherboard Block Diagram

1-1 Installation Precautions

1-3 Installing the APU and APU Cooler

APU and Cooler Installation Precautions and Procedures

Guidelines for APU installation, including pin identification and cooler attachment.

1-4 Installing the Memory

Memory Installation Precautions and Steps

Guidelines for memory installation and dual channel configuration.

1-5 Installing an Expansion Card

1-7 Back Panel Connectors

1-8 Internal Connectors

ATX Power Connectors

Fan Headers and CMOS Clear Function

Front Panel Header Connections

Front Panel Audio and S;PDIF Out Headers

USB Headers

Chapter 2 BIOS Setup

Accessing and Upgrading the BIOS

How to enter BIOS Setup and upgrade BIOS using utilities.

2-2 The Main Menu

3 D BIOS Interface and Main Menu Navigation

BIOS Setup Menus Overview

Key Function Keys and Menu Categories

2-3 M.I.T. (Motherboard Intelligent Tweaker)

M.I.T. Current Status and Overclocking Warnings

Current M.I.T. status and warnings regarding overclocking.

Advanced Frequency Settings

CPU, PCIe, Graphics, and NB Clock Control

Controls for CPU, PCIe, Graphics, and North Bridge clock frequencies.

Advanced Memory Settings

Memory Timing Selection and Voltage Settings

Configuration options for memory timings and voltages.

PC Health Status

System Monitoring and Case Open Status

2-5 BIOS Features

Boot Option Priorities and Hard Drive BBS Priorities

2-6 Peripherals Configuration

SATA, USB, HD Audio, and LAN Controller Settings

2-7 Power Management

Resume by Alarm, HPET, ErP, Soft-Off, AC BACK Settings

2-8 Save & Exit BIOS Setup

Saving Changes, Loading Defaults, Boot Override, and Profile Management

Application Software and Technical Manuals

Chapter 4 Unique Features

4-1 BIOS Update Utilities Overview

Introduction to DualBIOS, Q-Flash, and @BIOS utilities.

BIOS Update Process with Q-Flash

Q-Flash BIOS Update Steps and Completion

Step-by-step guide for updating BIOS using Q-Flash.

4-1-2 Updating the BIOS with the @BIOS Utility

@BIOS Update Preparation, Procedure, and Post-Update Steps

Guide to updating BIOS via @BIOS utility in Windows.

4-2 EasyTune 6 Utility

EasyTune 6 Interface, Tabs, and Functions

4-4 Smart Recovery 2 Backup and Restore

Smart Recovery 2 Features, Backup Creation, and File Recovery

4-5 Auto Green Power Saving Feature

Configuring SATA Controller Mode in BIOS Setup

SATA Controller Mode Settings (IDE, RAID, AHCI)

Setting SATA controller modes in BIOS for optimal performance.

C. Configuring RAID Set in RAID BIOS

RAID BIOS Utility Entry and Main Menu Options

Entering RAID BIOS and navigating its main menu options.

5-1-2 Installing SATA RAID;AHCI Drivers and OS

Installing Windows 7;Vista;XP with SATA Drivers

Steps for installing Windows 7/Vista/XP with SATA drivers.

5-2 Configuring Audio Input and Output

Multi-Channel Audio Setup and Speaker Configuration

5-2-3 Configuring Microphone Recording

Microphone Connection, Jack Configuration, and Volume Adjustment

5-3 Troubleshooting

Frequently Asked Questions

Common troubleshooting questions and solutions.

Troubleshooting Procedure - Initial Steps

Power Off, Peripherals Removal, and Cooler;Memory Checks

Initial troubleshooting steps for system startup issues.

Troubleshooting Procedure - Advanced Steps

System Checks, BIOS Defaults, OS Reinstallation, and Device Isolation

Advanced troubleshooting for system stability and boot issues.