Gigabyte GA-F2A75-D3H - 2-6 Peripherals Configuration; SATA, USB, HD Audio, and LAN Controller Settings

- 47 -
BIOS Setup
2-6 Peripherals
& OnChip SATA Channel
 EnablesordisablestheintegratedSATAcontrollers.(Default:Enabled)
& OnChip SATA Type
 EnablesordisablesRAIDfortheSATAcontrollersintegratedintheAMDChipsetorcongurestheSATA
controllers to AHCI mode.
IDE   CongurestheSATAcontrollertoIDEmode.
RAID Enables RAID for the SATA controller.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
& OnChip SATA Port4/5 Type (SATA3 4/SATA3 5 connectors)
 ThisoptioniscongurableonlywhenOnChip SATA Type is set to RAID or AHCI.Congurestheoperating
mode of the integrated SATA3 4 and SATA3 5 connectors.
AsSATAType ThemodedependsontheOnChipSATATypesettings.(Default)
IDE   DisablesRAIDfortheSATAcontrollerandcongurestheSATAcontrollertoIDEmode.
& Enable all USB device
 EnablesordisablestheintegratedUSBcontroller.(Default:Enabled)
& HD Audio Azalia Device
 Enablesordisablestheonboardaudiofunction.(Default:Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& IOMMU
 EnablesordisablesAMDIOMMUsupport.(Default:Enabled)
& Onboard LAN Controller
 EnablesordisablestheonboardLANfunction.(Default:Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.