- 32 -
3. First, select a RAID mode and press <Enter>. The selections available depend on the number of the hard drives
All available
space
4. Select a caching mode. Options include Read/Write, Read Only, and None. Then press <Enter> to proceed.
5.
Deleting an Array
The menu option allows for deletion of disk array assignments.
1. Select in the Main Menu and press <Enter>.
2. In the Arrays section, press the <Insert> key on the array you want to delete and then press <Enter> to proceed.
3.
With the correct BIOS settings, you are ready to install the operating system.
A. Installing Windows 8.1/7
Step 1:
You need to install the SATA RAID/AHCI driver during the OS installation. Use an alternative system to copy
Hw8_A88 folder
under BootDrv in the driver disk.
Step 2:
Boot from the Windows 8.1 setup disk and perform standard OS installation steps. When the screen requesting
you to load the driver appears, select Browse.
Step 3:
For Windows 7, browse to the Hw7_A88 folder.
Step 4:
When a screen appears, select AMD-RAID Controller and click to load the driver and continue the OS
installation.
Method A
• \BootDrv\Hxp
Method B
Steps:
1: Use an alternative system and insert the motherboard driver disk.
2: From your optical drive folder, double click the Menu.exeBootDrv folder. A Command Prompt
window will open.
3:
example, for the AMD A68H, select .
To Next Page
Loading...
