- 25 -
&
Administrator Password/User Password item.
Setup A password is only required for entering the BIOS Setup program.
System A password is required for booting the system and for entering the BIOS Setup
&
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
&
& CSM Support
Never Disables UEFI CSM and supports UEFI BIOS boot process only.
is set to Windows 8.
& Boot Mode Selection
Allows you to select which type of operating system to boot.
UEFI and Legacy
Allows booting from operating systems that support legacy option ROM or UEFI
Legacy Only Allows booting from operating systems that only support legacy Option ROM.
UEFI Only Allows booting from operating systems that only support UEFI Option ROM.
CSM Support is set to Always.
&
CSM Support is set to Always.
&
Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.
Disabled Disables option ROM.
UEFI Only Enables UEFI option ROM only.
CSM Support is set to Always.
&
Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other
than the LAN, storage device, and graphics controllers.
Legacy OpROM Enables legacy option ROM only.
& Network stack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from
& Ipv4 PXE Support
Network stack is enabled.
& Ipv6 PXE Support
Network stack is enabled.
To Next Page
Loading...
