Need help?Do you have a question about the Gigabyte GA-H110M-H and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 2 |
| Supported memory types | DDR4-SDRAM |
| Maximum internal memory | 32 GB |
| Supported memory clock speeds | 2133 MHz |
| Supported RDIMM clock speeds | 978 MHz |
| Processor socket | LGA 1151 (Socket H4) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Celeron, Intel Pentium |
| Intel® Core i3/i5/i7/i9 series | i3-6xxx, i5-6xxx, i7-6xxx |
| Maximum number of SMP processors | 1 |
| Number of SATA III connectors | 4 |
| USB 3.2 Gen 2 (3.1 Gen 2) connectors | 0 |
| Supported storage drive interfaces | SATA III |
| HDMI version | 1.4 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Cooling type | Active |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | Intel® H110 |
| PC health monitoring | CPU, FAN, Temperature, Voltage |
| Audio output channels | 7.1 channels |
| Motherboard form factor | micro ATX |
| BIOS type | UEFI AMI |
| BIOS memory size | 64 Mbit |
| Bundled software | - Norton® Internet Security (OEM version) - cFosSpeed |
| Ethernet interface type | Gigabit Ethernet |
Weight and Dimensions| Depth | 174 mm |
|---|---|
| Width | 226 mm |
Essential guidelines and safety precautions before installing motherboard hardware.
Identifies and details all internal motherboard connectors and headers.
Step-by-step guide for installing the Central Processing Unit (CPU).
Instructions for installing RAM modules and configuring dual-channel memory.
Details specifications for CPU, chipset, memory, onboard graphics, audio, and LAN.
Overview of BIOS setup, Q-Flash, and @BIOS utilities for system configuration.
Details CPU clock ratios, frequencies, and Turbo Boost technology settings.
Settings for Hyper-Threading, CPU halt states, thermal monitoring, and EIST.
Options for memory multiplier, timings, channel interleaving, and boot modes.
Controls AC power loss behavior, keyboard/mouse wake-up, and ErP power saving.
Options for saving changes, exiting setup, loading defaults, and managing profiles.
Configuration options for CPU core ratio, power limits, and core count.
To Next Page