Gigabyte GA-H55M-S2V - Page 37

- 37 - BIOS Setup
tRTP
Options are: Auto (default), 1~15.
tFAW
Options are: Auto (default), 1~63.
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
Static tRD
Options are: Auto (default), 1~31.

Advanced Voltage Settings
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Advanced Voltage Settings
******
Mother Board Voltage Control
******
Voltage Types Normal Current
-----------------------------------------------------------------------------
>>> CPU
Dynamic Vcore(DVID) +0.00000V [Auto]
QPI/Vtt Voltage 1.100V [Auto]
Graphics Core 1.000V [Auto]
>>> MCH/ICH
PCH Core 1.050V [Auto]
>>> DRAM
DRAM Voltage 1.500V [Auto]
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

>>> CPU
Dynamic Vcore(DVID)
The default is Auto.
QPI/Vtt Voltage
The default is Auto.
Graphics Core
The default is Auto.
>>> MCH/ICH
PCH Core
The default is Auto.
>>> DRAM
DRAM Voltage
The default is Auto.