Gigabyte GA-H55N-USB3 - Page 29

- 29 - Hardware Installation
13) DEBUG PORT (Debug Card Header)
(Note)
This header can connect a debug card.
DEBUG PORT
G.QBOFM
2
1
12
11
Pin No. Denition
1 No Pin
2 GND
3 VCC3
4 LAD0
5 LAD1
6 LAD2
7 LAD3
8 -LFRAME
9 -PFMRST
10 DB CLK
11 DB_P_SENSOR
12 NC
(Note) Whether this feature is supported depends on the product being received.
14) PHASE LED
The number of lighted LEDs indicates the CPU loading. The higher the CPU loading, the more the
number of lighted LEDs. To enable the Phase LED display function, please rst enable Dynamic Energy
Saver
™
2. Refer to Chapter 4, "Dynamic Energy Saver
™
2," for more details.