Gigabyte GA-H61M-D2P-B3 - Product Specifications

- 7 - Hardware Installation
1-2 ProductSpecications
CPU Support for an Intel 
®
Core
™
i7 series processor/Intel
®
Core
™
i5 series processor/
Intel
®
Core
™
i3 series processor/Intel
®
Pentium
®
processors/Intel
®
Celeron
®
processors in the LGA1155 package
(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU 
Chipset Intel 
®
H61 Express Chipset
Memory 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory 
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than 4 GB.
Dual channel memory architecture 
Support for DDR3 1333/1066/800 MHz memory modules 
Support for non-ECC memory modules 
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Onboard
Graphics
Integrated in the Chipset: 
- 1 x D-Sub port
- 1 x DVI-D port, supporting a maximum resolution of 1920x1200
* The DVI-D port does not support D-Sub connection by adapter.
Audio Realtek ALC889 codec 
High Denition Audio 
2/4/5.1/7.1-channel 
* To congure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
LAN 1 x Realtek RTL8111E chip (10/100/1000 Mbit) 
Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16) 
* For optimum performance, if only one PCI Express graphics card is to be installed,
be sure to install it in the PCIEX16 slot.
1 x PCI Express x16 slot, running at x4 (PCIEX4) 
2 x PCI slots 
Storage Interface Chipset: 
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
USB Chipset: 
- Up to 10 USB 2.0/1.1 ports (6 on the back panel, 4 via the USB brackets
connected to the internal USB headers)
Internal
Connectors
1 x 24-pin ATX main power connector 
1 x 4-pin ATX 12V power connector 
4 x SATA 3Gb/s connectors 
1 x CPU fan header 
1 x system fan header 
1 x front panel header 
1 x front panel audio header 
2 x USB 2.0/1.1 headers 
1 x parallel port 
1 x serial port 
1 x clearing CMOS jumper 