Gigabyte GA-H61M-HD2 - Peripheral Device Configuration

- 33 -
2-6 Peripherals
& SATA Controller(s) (Intel H61 Chipset)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode Selection (Intel H61 Chipset)
 AllowsyoutodecidewhethertoconguretheSATAcontrollerintegratedintheIntelH61ChipsettoAHCI
mode.
IDE  CongurestheSATAcontrollertoIDEmode.(Default)
AHCI  CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface(AHCI)
isaninterfacespecicationthatallowsthestoragedrivertoenableadvancedSerialATA
features such as Native Command Queuing and hot plug.
& USB2.0 Controller
Enables or disables the integrated USB 2.0/1.1 controller. (Default: Enabled)
& Audio Controller
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Init Display First
 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIgraphicscard,PCIExpressgraphics
card, or the onboard graphics.
Auto  LetsBIOSautomaticallycongurethissetting.(Default)
IGFX  Setstheonboardgraphicsastherstdisplay.
PEG  SetsthePCIExpressgraphicscardonthePCIEX16slotastherstdisplay.
& Internal Graphics
Enables or disables the onboard graphics function. (Default: Auto)
& InternalGraphicsMemorySize
Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)
& DVMTTotalMemorySize
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: MAX)