Need help?Do you have a question about the Gigabyte GA-H61MA-D3V and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Memory voltage | 1.5 V |
| Memory channels | Dual-channel |
| Number of memory slots | 2 |
| Supported memory types | DDR3-SDRAM |
| Maximum internal memory | 16 GB |
| Supported memory clock speeds | 800, 1066, 1333 MHz |
| Supported memory module capacities | 2GB, 4GB, 8GB |
| Processor socket | LGA 1155 (Socket H2) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Celeron, Intel Pentium |
| Maximum number of SMP processors | 1 |
| Number of SATA II connectors | 4 |
| Number of Parallel ATA connectors | 0 |
| USB 3.2 Gen 1 (3.1 Gen 1) connectors | - |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power source type | ATX |
| Motherboard chipset | Intel® H61 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | micro ATX |
| RAID levels | 0, 1 |
| Supported storage drive interfaces | SATA II, SATA III |
| Parallel processing technology support | Not supported |
| PCI Express x1 slots | 3 |
| PCI Express slots version | 3.0 |
| Networking features | Gigabit Ethernet |
| BIOS type | EFI AMI |
| ACPI version | 2.0a |
Weight and Dimensions| Depth | 174 mm |
|---|---|
| Width | 244 mm |
Guidelines for safely installing hardware components to prevent damage.
Detailed technical specifications of the motherboard components and features.
Step-by-step instructions for safely installing the Central Processing Unit (CPU).
Procedures for installing DDR3 memory modules into the motherboard slots.
Guide to setting up SATA drives and configuring RAID arrays.
To Next Page