Need help?Do you have a question about the Gigabyte GA-H61N-USB3 and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Memory voltage | 1.5 V |
| Number of memory slots | 2 |
| Supported memory types | DDR3-SDRAM |
| Maximum internal memory | 16 GB |
| Supported memory clock speeds | 800, 1066, 1333 MHz |
| Processor socket | LGA 1155 (Socket H2) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Celeron, Intel Pentium |
| Number of Parallel ATA connectors | - |
| Peripheral (Molex) power connectors (4-pin) | 1 |
| BIOS type | AWARD |
| ACPI version | 1.0b |
| PS/2 ports quantity | 0 |
| USB 2.0 ports quantity | 4 |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | Intel® H61 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | mini ITX |
| Compatible operating systems | Microsoft Windows 7/Vista/XP |
| Supported storage drive interfaces | SATA II |
| Parallel processing technology support | Not supported |
| Bundled software | Norton Internet Security |
| LAN controller | Realtek RTL8111E |
| Networking features | Gigabit Ethernet |
Weight and Dimensions| Width | 170 mm |
|---|
Locate socket, identify notches, and perform CPU installation steps.
Step-by-step guide to install the CPU cooler on the motherboard.
Detailed steps for inserting memory modules into the motherboard slots.
Steps for seating and securing an expansion card.
How to enter the BIOS Setup program.
Displays current system status and frequency adjustment options.
Settings for CPU core ratio, frequency, and Turbo Boost.
Detailed explanations of CPU core features like Turbo Boost and Halt states.
Options for memory multiplier, frequency, and timings.
Settings for CAS Latency, tRCD, tRP, and tRAS.
Controls for CPU, VTT, Graphics, and DRAM voltages.
Guide to installing essential chipset drivers.
Utility for system data backup and restoration.
Details on performing backups and restoring data using the utility.
Step-by-step guide to update BIOS using Q-Flash.
Recommends loading defaults after a BIOS update.
Step-by-step guide to update BIOS using the @BIOS utility.
Utilities for speeding up boot time and CPU overclocking.
Backs up and restores partitions using image files.
Steps for system recovery using Smart Recovery 2.
Answers to common issues with BIOS options and hardware.
Step-by-step flowchart for diagnosing system startup problems.
Continues the flowchart for diagnosing system boot failures.
To Next Page