- 21 - Hardware Installation
1-7 Internal Connectors
Read the following guidelines before connecting external devices:
• First make sure your devices are compliant with the connectors you wish to connect.
• Before installing the devices, be sure to turn off the devices and your computer. Unplug the
power cord from the power outlet to prevent damage to the devices.
• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
1) ATX_12V _2X 9) F_ PANEL
2) ATX 10) F_AUDIO
3) CPU_FAN 11) SPDIF_O
4) SYS_FAN1/SYS_FAN2 12) F_USB1/F_USB2/F_USB3/F_USB4
5) PWR_FAN 13) COMA
6) BAT 14) CLR_CMOS
7) SATA3_0/1 15) PHASE LED
8) SATA2_2/3/4/5
31
15
2
13 124
10
11
5
4
9
14
8
7
6
To Next Page
Loading...
