K8 nForce4 SLI Series Motherboard - 82 -
English
8 Channel Audio Setup
STEP 1 :
Connect the front channels to "Front Speaker Out",
the rear channels to "Rear Speaker Out", the Cen-
ter/Subwoofer channels to "Center/Subwoofer
Speaker Out", and the side channels to "Side
Speaker Out".
STEP 2 :
Following installation of the audio driver, you find a
Sound Effect icon on the lower right hand
taskbar. Click the icon to select the function.
STEP 3:
Click "Speaker Configuration" then click on the
left selection bar and select "8CH Speaker" to
complete 8 channel audio configuration.
Sound Effect Configuration:
At the sound effect menu, users can adjust
sound option settings as desired.
Side Speaker Out
Front Speaker Out
Rear Speaker
Out
Center/Subwoofer
Speaker Out
To Next Page
Loading...
