To Next PageTo Next Page
Need help?Do you have a question about the Gigabyte GA-X99-SLI and is the answer not in the manual?
General| ECC | No |
|---|---|
| Non-ECC | Yes |
| Memory channels | Quad-channel |
| Memory slots type | DIMM |
| Number of memory slots | 8 |
| Supported memory types | DDR4-SDRAM |
| Maximum internal memory | 128 GB |
| Supported memory clock speeds | 2133, 2400, 2666, 2800, 3000, 3200 MHz |
| Processor socket | LGA 2011-v3 |
| Processor manufacturer | Intel |
| Compatible processor series | Intel® Core™ i7 |
| Maximum number of SMP processors | 1 |
| USB 2.0 connectors | 2 |
| Number of SATA III connectors | 10 |
| Number of Parallel ATA connectors | - |
| RAID levels | 0, 1, 5, 10 |
| Supported storage drive interfaces | M.2, SATA, SATA III |
| USB 2.0 ports quantity | 4 |
| VGA (D-Sub) ports quantity | 0 |
| Ethernet interface type | Gigabit Ethernet |
| Audio chip | Realtek ALC1150 |
| Component for | PC |
| Motherboard chipset | Intel® X99 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | ATX |
| Parallel processing technology support | 2-Way CrossFireX, 3-Way CrossFireX, 3-Way SLI, 4-Way CrossFireX |
| PCI Express x1 slots | 3 |
| BIOS type | UEFI AMI |
| ACPI version | 5.0 |
| BIOS memory size | 128 Mbit |
Weight and Dimensions| Depth | 305 mm |
|---|---|
| Width | 244 mm |
Essential safety and handling guidelines before installing the motherboard and components.
Detailed technical specifications of the GA-X99-SLI motherboard, including CPU, memory, and expansion slots.
Step-by-step instructions for installing the CPU and its associated cooling solution.
Guidelines and procedures for installing DDR4 memory modules into the motherboard sockets.
Instructions for installing expansion cards, such as graphics cards, into PCI Express slots.
Guide on setting up multi-GPU configurations using AMD CrossFire or NVIDIA SLI technologies.
Identification and description of all external connectors on the motherboard's rear panel.
Identification and description of all internal connectors on the motherboard.
Describes the initial GIGABYTE logo screen that appears during system boot.
Overview of the BIOS setup interface, including Startup Guide and ST Mode.
Section for configuring system clocks, frequencies, voltages, and monitoring temperatures.
Displays motherboard model, BIOS version, and allows setting system language and time.
Configuration options for boot order, security, fast boot, and other BIOS-level features.
Settings for initial display output, audio LED, USB support, and Ethernet connection.
Configuration options for SATA controllers, including IDE, AHCI, and RAID modes.
Settings related to system power states, AC power loss behavior, and keyboard/mouse power-on.
Options for saving BIOS changes, loading defaults, and exiting the BIOS setup utility.
Instructions for installing SATA hard drives and configuring SATA controller modes in BIOS.
Steps for installing Windows and the necessary SATA RAID/AHCI drivers.
Instructions on how to install system drivers using the provided motherboard driver disk.
Contains important regulatory notices, RoHS, WEEE, and FCC compliance information.
