Need help?Do you have a question about the Gigabyte GA-X58A-UD7 and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Number of memory slots | 6 |
| Maximum internal memory | 24 GB |
| Processor socket | Socket B (LGA 1366) |
| Processor manufacturer | Intel |
| USB 2.0 connectors | 2 |
| Number of SATA connectors | 10 |
| Number of EATX power connectors | 1 |
| Controller interface type | Marvell 9128 |
| Controller 2nd interface type | JMB362 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 0 |
| Audio chip | Realtek ALC889 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | ATX |
| Compatible operating systems | Win 7/Vista/XP |
| BIOS type | AWARD |
| BIOS memory size | 32 Mbit |
| PCI Express x16 slots | 4 |
| RAID levels | 0, 1, JBOD |
| Networking features | Gigabit Ethernet |
Weight and Dimensions| Depth | 244 mm |
|---|---|
| Width | 305 mm |
Guidelines and procedures to follow before installing hardware to prevent damage.
Step-by-step instructions for installing the CPU and its cooler.
Guidance on installing DDR3 memory modules for optimal performance.
Configuration options for CPU, memory clocks, frequencies, and voltages.
Procedure for installing essential chipset drivers from the motherboard disk.
Tools for updating the motherboard's BIOS using Q-Flash or @BIOS.
Steps to install and configure SATA hard drives, including RAID setup.
Information to help diagnose and resolve system startup or hardware issues.
A step-by-step flowchart to diagnose and solve system startup problems.
To Next Page