Hardware Installation- 11 -
English
I/O Control IT8712
Hardware Monitor System voltage detection
CPU temperature detection
CPU / System / Power fan speed detection
CPU warning temperature
CPU fan failure warning
CPU smart fan control
Onboard SATA RAID Onboard nForce4 Ultra/SLI* chipset
(S_ATA0_SB, S_ATA1_SB, S_ATA2_SB, S_ATA3_SB)
- supports data striping (RAID 0) or mirroring (RAID 1) or
striping + mirroring (RAID 0+1) function
- supports data transfer rate of up to 300 MB/s
- supports hot plugging function
- supports a maximum of 4 SATA connections
Supported on the Win 2000/XP operating systems
BIOS Use of licensed AWARD BIOS
Supports Dual BIOS/Q-Flash
Additional Features Supports @BIOS
Supports EasyTune
(Note 2)
Overclocking Over Voltage via BIOS (CPU/ DDR/ HT-Link/ Core Power)
Form Factor ATX form factor; 30.5cm x 24.4cm
(Note 1) Due to standard PC architecture, a certain amount of memory is reserved for system usage
and therefore the actual memory size is less than the stated amount.
For example, 4 GB of memory size will instead be shown as 3.xxGB memory during system
startup.
(Note 2) EasyTune functions may vary depending on different motherboards.
To Next Page
Loading...