GA-K8NF9 Ultra Motherboard - 44 -
English
2-7 MB Intelligent Tweaker(M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
MB Intelligent Tweaker(M.I.T.)
HT Frequency ratio [Auto]
CPU Frequency [200]
K8 CPU Clock Ratio [Auto]
Current DDR speed 400
CPU Spread Spectrum [Center Spread]
PCIE Clock [100Mhz]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.300V
Chipset core PCI-E voltage [Normal]
HT-Link voltage control [Normal]
DDR voltage control [Normal]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`
HT Frequency Ratio
This setup option will automatically assign by CPU detection. (Default value: Auto)
CPU Frequency
200 ~ 456 Set CPU frequency from 200Mhz to 456Mhz.
K8 CPU Clock Ratio
This setup option will automatically assign by CPU detection. (Default value: Auto)
Current DDR speed
Display the current DDR speed.
CPU Spread Spectrum
Disabled Disable CPU Spread Spectrum.
Center Spread Set CPU Spread Spectrum to Center Spread. (Default value)
PCIE Clock
100Mhz ~ 150Mhz Set PCI-E clock from 100Mhz to 150Mhz.
CPU Voltage Control
Supports adjustable CPU Vcore from 0.800V to 1.700V by 0.025V step. (Default value: Normal)
Normal CPU Vcore
Display your CPU Vcore voltage.
Incorrect using these features may cause your system broken. For power end-user use only.
To Next Page
Loading...