Gigabyte GA-K8NF9 Ultra - Page 36

GA-K8NF9 Ultra Motherboard - 36 -
English
IDE Prefetch Mode
Enabled Enable IDE Prefetch mode. (Default value)
Disabled Disable IDE Prefetch mode.
USB Memory Type
SHADOW Set USB memory type to SHADOW. (Default value)
Base Memory(640K)Set USB memory type to base memory(640K).
AC97 Audio
Auto Enable onboard AC'97 audio function. (Default value)
Disabled Disable this function.
Onboard 1394
Enabled Enable onboard IEEE1394 function. (Default value)
Disabled Disable onboard IEEE1394 function.
Onboard Serial Port 1
Auto BIOS will automatically setup the Serial port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
Onboard IrDA Port
Auto BIOS will automatically setup the IrDA port address.
3F8/IRQ4 Enable onboard IrDA port and address is 3F8.
2F8/IRQ3 Enable onboard IrDA port and address is 2F8. (Default value)
3E8/IRQ4 Enable onboard IrDA port and address is 3E8.
2E8/IRQ3 Enable onboard IrDA port and address is 2E8.
Disabled Disable onboard IrDA port.
Onboard Parallel Port
Disabled Disable onboard LPT port.
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value)
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
SPP Using Parallel port as Standard Parallel Port. (Default value)
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP and EPP mode.
ECP Mode Use DMA
3 Set ECP Mode Use DMA to 3. (Default value)
1 Set ECP Mode Use DMA to 1.