Gigabyte GA-K8NS-939 - PC Health Status

GA-K8NS-939/GA-K8NS Pro-939 Motherboard - 42 -
English
2-6 PC Health Status
Current Voltage(V) Vcore / DDR25V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/POWER/SYSTEM FAN Speed (RPM)
Detect CPU/POWER/SYSTEM Fan speed status automatically.
CPU Warning Temperature
60
o
C / 140
o
F Monitor CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F Monitor CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F Monitor CPU temperature at 80
o
C / 176
o
F.
90
o
C / 194
o
F Monitor CPU temperature at 90
o
C / 194
o
F.
Disabled Disable this function. (Default value)
CPU/POWER/SYSTEM FAN Fail Warning
Disabled Disable CPU/POWER/SYSTEM fan fail warning function. (Default value)
Enabled Enable CPU/POWER/SYSTEM fan fail warning function.
CPU Smart FAN Control
Disabled Disable this function.
Enabled Enable CPU Smart Fan control function. (Default value)
a. When the CPU temperature is higher than 60 degrees Celsius, CPU fan
will run at full speed.
b. The speed of CPU fan will increase linearly depend on the temperature if
the temperature is more than 50 degree and less than 59 degree.
c. When the CPU temperature is lower than 50 degrees Celsius, CPU fan will
run at the lowest speed.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PC Health Status
Vcore OK
DDR25V OK
+3.3V OK
+12V OK
Current CPU Temperature 65
o
C
Current CPU FAN Speed 3245 RPM
Current POWER FAN Speed 0 RPM
Current SYSTEM FAN Speed 0 RPM
CPU Warning Temperature [Disabled]
CPU FAN Fail Warning [Disabled]
POWER FAN Fail Warning [Disabled]
SYSTEM FAN Fail Warning [Disabled]
CPU Smart FAN Control [Enabled]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`
[Disabled]
Don't monitor
current temperature
[60
o
C-90
o
C]
Alarm when current
temperature over than
the selected
temperature