Hardware Installation Process
English
- 27 -
13) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn
to another color.
+
_
14) RAM_LED
Do not remove memory modules while RAM_LED is on. It might cause short or other unexpected
damages due to the stand by voltage. Remove memory modules only when AC power cord is
disconnected.
Pin No. Definition
1 MPD+
2 MPD-
3 MPD-
1
To Next Page
Loading...
