BIOS Setup- 45 -
English
Memory Clock
Set the memory clock for your platform.
DDR2 400 Set memory clock to DDR2 400.
DDR2 533 Set memory clock to DDR2 533.
DDR2 667 Set memory clock to DDR2 667.
DDR2 800 Set memory clock to DDR2 800.
CAS# latency (Tcl)
3/4/5/6 Set CAS Latency to 3/4/5/6 (Default value:4)
PCIE Clock
100~145MHz Set PCIE Clock from 100MHz to 145MHz.
CPU HT-Link Voltage
Set the voltage settings for the HT-Link between CPU and Northbridge.
Normal Set CPU HT-Link voltage to Normal. (Default value)
+0.1V Set CPU HT-Link voltage to +0.1V.
+0.2V Set CPU HT-Link voltage to +0.2V.
S-Chipset Voltage Control
Set the voltage settings for Southbridge.
Normal Set Southbridge voltage to Normal. (Default value)
+2%~16% Set Southbridge voltage to +2%~+16%.
NB/PCIE/HT-Link Voltage
Set the voltage settings for Northbridge, its PCI Express bus voltage, and the HT-Link between
Northbridge and Sourthbridge.
Normal Set NB/PCIE/HT-Link Voltage to Normal. (Default value)
+2%~16% Set NB/PCIE/HT-Link Voltage to +2%~+16%.
DDR2 Voltage Control
Please note that by overclocking your system through the increase of the DDR2 voltage, damage
to the memory may occur.
Supports adjustable DDR2 Voltage from 1.850V to 2.450V. (Default value: Normal)
CPU Voltage Control
Please note that by overclocking your system through the increase of the CPU voltage, damage
to the CPU or decrease in the CPU life expectancy may occur.
Supports adjustable CPU Voltage from 0.8000V to 1.5500V. (Default value: Normal)
Normal CPU Vcore
Display your CPU Vcore Voltage.
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto Set Robust Graphics Booster to Auto. (Default value)
Fast Set Robust Graphics Booster to Fast.
Turbo Set Robust Graphics Booster to Turbo.
To Next Page
Loading...
