Gigabyte GA-M57SLI-S4 - Page 45

BIOS Setup- 45 -
English
Power-On by Alarm
You can set "Power-On by Alarm" item to Enabled and key in Date/Time to power on system.
Disabled Disable this function. (Default value)
Enabled Enable alarm function to POWER ON system.
If Power-On by Alarm is Enabled.
Day of Month Alarm : Everyday, 1~31
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
HPET Support
(Note)
Enabled Enable support for High Precision Event Timer (HPET) funtion. (Default value)
Disabled Disable this function.
Power On By Mouse
Disabled Disable this function. (Default value)
Double-Click Double click on PS/2 mouse left button to power on the system.
Power On By Keyboard
Disabled Disable this function. (Default value)
Password Enter from 1 to 5 characters to set the Keyboard Power On Password.
Any KEY Press any key to power on the system.
Keyboard 98 If your keyboard have "POWER Key" button, you can press the key to power
on the system.
KB Power ON Password
When "Power On by Keyboard" is set to Password, you can set the password here.
Enter Input password (from 1 to 5 characters) and press Enter to set the Keyboard
Power On password.
AC BACK Function
Soft-Off When AC-power back to the system, the system will be in "Off" state.
(Default value)
Full-On When AC-power back to the system, the system always in "On" state.
(Note) Supported on Windows
®
Vista
®
operating system only.