GA-M750SLI-D4 Motherboard - 42 -
DDR2 Voltage Control
Allows you to set memory voltage.
Normal Supplies the memory voltage as required. (Default)
+0.05V ~ +0.35V Increases memory voltage by 0.05V to 0.35V at 0.05V increment.
Note: Increasing memory voltage may result in damage to the memory.
VCC12_HT Voltage Control
Allows you to set the voltage of the HyperTransport bus between CPU and chipset.
Normal Supplies the HyperTransport voltage as required. (Default)
+0.05V ~ +0.35V Increases the HyperTransport voltage by 0.05V to 0.35V at 0.05V increment.
NB_VCC Voltage Control
Allows you to set the chipset core voltage.
Normal Supplies the chipset core voltage as required. (Default)
+0.05V ~ +0.35V Increases the chipset core voltage by 0.05V to 0.35V at 0.05V increment.
1V1_DUAL Voltage Control
Allows you to set the chipset standby voltage.
Normal Supplies the chipset standby voltage as required. (Default)
+0.05V ~ +0.15V Increases the chipset standby voltage by 0.05V to 0.15V at 0.05V increment.
CPU NB VID Control
(Note)
Allows you to set the CPU northbridge voltage. Normal sets the CPU northbridge voltage as
required. The adjustable range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU northbridge voltage may result in damage to your CPU or reduce the useful
life of the CPU.
CPU Voltage Control
Allows you to set the CPU voltage. Normal sets the CPU voltage as required. The adjustable
range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the
CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.
(Note) This item appears only if you install a CPU that supports this feature.
To Next Page
Loading...
