GA-MA69G-S3H Motherboard - 92 -
English
Step 1:
Make sure the ATI VGA driver has been installed.
Setting Your TV as the Primary Display Through ATI Catalyst Control Center
Step 2:
After the installation, you will find an ATI Catalyst
Control Center icon in your system tray.
Right-click the icon to select Catalyst
Control
Center. Or you can right-click on the desktop to
select ATI CATALYST(R) Control Center.
Step 3:
The Basic View is the default view when Catalyst
Control Center is launched for the first time. This
interface provides access to the basic settings and
advanced features of your ATI graphics products.
You can switch between Basic View and Advanced
View at any time. Please
select Basic [Easy Setup
Wizards and Quick Settings], then click Next.
Step 4:
Choose Setup my display configuration from
the central list and click Go. The EasySetup Wiz-
ard will assist you in step-by-step configurations.
To Next Page
Loading...
