GA-MA69GM-S2H Motherboard - 92 -
English
Step 5:
Select Standard TV, then click Next.
Step 6:
Depending on your requirements, select the type of
content that you will view on your TV. Then click
Next.
Step 7:
Accept or change the display resolution for your
desktop area, then click Finish to apply your set-
tings and return to the Easy Setup / Quick Settings
page. The recommended settings for desktop view-
ing are preselected.
C. Configuring Your HDTV LCD TV's Resolution
After connecting an HDTV LCD TV to your computer, follow the steps below to configure your HDTV's
resolution.
Configuring the Resolution:
After installing the ATI graphics driver from the
motherboard driver disk, select the appropriate
resolution.
Step 1:
You will find an ATI Catalyst Control Center icon
in your system tray. Right-click the icon to
select Catalyst
Control Center. Or you can right-
click on the desktop to select ATI CATALYST(R)
Control Center.
To Next Page
Loading...
