- 41 - BIOS
셋업
2-5 Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
IDEConguration [Press Enter]
OnChip SATA Controller [Enabled]
OnChip SATA Type [Native IDE]
Onboard Audio Function [Auto]
Onboard 1394 Function [Enabled]
Onboard LAN Function [Enabled]
Onboard LAN Boot ROM [Disabled]
OnChip IDE Channel [Enabled]
SMART LAN [Press Enter]
OnChip USB Controller [Enabled]
USB EHCI Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Legacy USB storage detect [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
IDE Conguration
OnChip IDE Channel0
통합
IDE
컨트롤러를 사용 또는 사용하지 않도록 설정합니다.
(
기본값
: Enabled)
OnChip SATA Controller
통합 SATA 컨트롤러를 사용 또는 사용하지 않도록 설정합니다. (기본값: Enabled)
OnChip SATA Type
통합 SATA 컨트롤러의 작동 모드를 구성합니다.
Native IDE SATA 컨트롤러가 Native IDE 모드로 작동할 수 있게 합니다. (기본값)
고유 모드를 지원하는 운영 체제 (예: Windows XP/2000)를 설치하려
면 고유 IDE 모드를 사용하도록 설정하십시오.
RAID SATA 컨트롤러에 대해 RAID 를 사용하도록 설정합니다.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
OnChip IDE Channel0 [Enabled]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level