Gigabyte GA-MA770-UD3 - Product Specifications

GA-MA770-UD3/US3 Motherboard - 10 -
1-2 Product Specifications
CPU  Support for Socket AM2+/AM2 processors:
AMD Phenom
TM
FX processor/AMD Phenom
TM
X4 processor/
AMD Phenom
TM
X3 processor/AMD Athlon
TM
X2 processor/
AMD Athlon
TM
processor/AMD Sempron
TM
X2 processor/
AMD Sempron
TM
processor
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport Bus  5200/2000 MT/s
Chipset  North Bridge: AMD 770
 South Bridge: AMD SB700
Memory  4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory
(Note 1)
 Dual channel memory architecture
 Support for DDR2 1200
(Note 2)
/1066/800/667 MHz memory modules
(Go to GIGABYTE's website for the latest memory support list.)
 Support for ECC memory
(Note 3)
Audio  Realtek ALC888 codec
 High Definition Audio
 2/4/5.1/7.1-channel
 Support for S/PDIF In/Out
 Support for CD In
LAN  Realtek 8111C chip (10/100/1000 Mbit)
Expansion Slots  1 x PCI Express x16 slot, running at x16 (PCIE_16)
(The PCI Express x16 slot conforms to PCI Express 2.0 standard.)
 4 x PCI Express x1 slots
 2 x PCI slots
Storage Interface  South Bridge:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 6 x SATA 3Gb/s connectors supporting up to 6 SA TA 3Gb/s devices
- Support for SATA RAID 0, RAID 1 and RAID 10
 iTE IT8720 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394  T.I. TSB43AB23 chip
 Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket
connected to the internal IEEE 1394a header)
USB  Integrated in the South Bridge
 Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets
connected to the internal USB headers)
"*" The GA-MA770-UD3 adopt All-Solid Capacitor design.