- 45 - BIOS Setup
2-5 Advanced BIOS Features
Internal Graphics Mode
Allows you to determine whether to allocate memory for the onboard graphics controller from the
system memory or SidePort memory.
UMA Allocates memory for the onboard graphics controller from the system
memory.
UMA+SidePort Allocates memory for the onboard graphics controller from the system
memory and SidePort memory. (Default)
Disabled Disables the onboard graphics controller.
Internal Graphics Mode
Allows you to determine whether to allocate the system memory for the onboard graphics controller.
UMA Allocates memory for the onboard graphics controller from the system
memory. (Default)
Disabled Disables the onboard graphics controller.
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics
controller. MS-DOS, for example, will use only this memory for display. Options are: Auto
(default), 128MB, 256MB, 512MB.
Surround View
Enables or disables the Surround View function. This option is configurable only if an ATI graphics
card is installed. (Default: Disabled)
Only for GA-MA78GPM-DS2H.
Only for GA-MA78GM-DS2H.
(Note) This item is present only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Advanced BIOS Features
Internal Graphics Mode [UMA+SidePort] 1
Internal Graphics Mode [UMA] 2
UMA Frame Buffer Size [Auto]
x Surround View Disabled
Onboard VGA output connect [D-SUB/DVI]
Virtualization [Disabled]
Patch AMD TLB Erratum
(Note)
[Enabled]
AMD K8 Cool&Quiet control [Auto]
` Hard Disk Boot Priority [Press Enter]
First Boot Device [Floppy]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Password Check [Setup]
HDD S.M.A.R.T. Capability [Disabled]
Away Mode [Disabled]
Init Display First [PEG]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
To Next Page
Loading...
