GA-MA790FX-DS5 Motherboard - 54 -
2-9 MB Intelligent Tweaker(M.I.T.)
• Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory
and reduce the useful life of these components. This page is for advanced users only and
we recommend you not to alter the default settings to prevent system instability or other
unexpected results. (Inadequately altering the settings may result in system's failure to
boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set
the System Voltage Control item to Auto to optimize the system voltage settings.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Clock Ratio [Auto]
CPU Host Clock Control [Auto]
x CPU Frequency (MHz) 200
HT Link Frequency [Auto]
PCIE Clock (MHz) [Auto]
Set Memory Clock [Auto]
x Memory Clock DDR 533
` DRAM Configuration [Press Enter]
********
System Voltage Optimized
********
System Voltage Control [Manual]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.3500V
DDR2 Voltage Control [Normal]
Chipset Voltage Control [Normal]
PCIE Voltage Control [Normal]
HTT Voltage Control [Normal]
HTR Voltage Control [Normal]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the
CPU being used.
CPU Host Clock Control
Enables or disables the control of CPU host clock. Auto (default) allows BIOS to automatically
adjust the CPU host frequency. Manual allows the CPU Frequency (Mhz) item below to be
configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to
allow for automated system reboot, or clear the CMOS values to reset the board to default values.
CPU Frequency (MHz)
Allows you to manually set the CPU host frequency.
The adjustable range is from 200 MHz to 500 MHz
Important It is highly recommended that the CPU frequency be set in accordance with the CPU
specifications.
To Next Page
Loading...
