Gigabyte GA-P41T-D3P (rev. 1.3 - Page 39

- 39 - BIOS Setup
Cmd Driving Pull-Down Level
Options are: Auto (default), +8~-7.
Ctrl Driving Pull-Down Level
Options are: Auto (default), +8~-7.
Clk Driving Pull-Down Level
Options are: Auto (default), +8~-7.
********
Mother Board Voltage Control
********
>>> CPU
CPU Vcore
The default is Auto.
CPU Termination
The default is Auto.
CPU Reference
The default is Auto.
>>> MCH/ICH
MCH Core
The default is Auto.
ICH I/O
The default is Auto.
>>> DRAM
DRAM Voltage
The default is Auto.