Gigabyte GA-P41T-D3P (rev. 1.3 - Page 72

Appendix - 72 -
The pictures to the right show the 7.1-channel speak-
er congurations.
7.1-Channel Speakers:
Center/Subwoofer
Speaker Out
Front Speaker Out
Rear Speaker Out
Side Speaker Out
Step 2:
Connect an audio device to an audio jack. The The cur-
rent connected device is dialog box appears. Select the
device according to the type of device you connect. Then
click OK.
Step 3:
On the Speakers screen, click the Speaker Congura-
tion tab. In the Speaker Conguration list, select Stereo,
Quadraphonic, 5.1 Speaker, or 7.1 Speaker according to
the type of speaker conguration you wish to set up. Then
the speaker setup is completed.
B. Conguring Sound Effect
You may congure an audio environment on the Sound Effects tab.