- 107 - Appendix
Figure 5
Figure 4
In Windows mode:
Steps:
1: Use an alternative system and insert the motherboard driver disk.
2: From your optical drive folder, double click the Menu.exe le in the BootDrv folder (Figure 4). A Command
Prompt window will open similar to that in Figure 5.
3: Insert the blank formatted disk. Depending on the operating system to be installed, select the controller
driver by pressing the corresponding letter from the menu and press <Enter>. For example, from the menu
in Figure 5,
• For the Intel P55, select 1) Intel Matrix Storage driver for 32bit system for Windows XP operating sys-
tem.
• For the JMicron JMB362, select 3) GIGABYTE GSATA driver for 32bit system for Windows 32-bit op-
erating system.
• For the Marvell 9128 , select 5) Marvell AHCI driver for 32bit system for Windows 32-bit operating
system (Windows XP only).
Your system will then automatically copy the driver les to the oppy disk. Press any key to exit when nished.
To Next Page
Loading...
