GA-Q35M-S2 Motherboard - 48 -
Smart FAN Control Method
(Note)
Specifies how to control CPU fan speed.
Auto Lets BIOS control CPU fan speed. (Default)
Intel(R) QST Allows CPU fan speed to be controlled by the Intel Quiet System Technology
(QST). This feature requires the installation of Intel Host Embedded Control
Interface (HECI) driver from the motherboard driver disk.
Legacy Allows CPU fan to run at different speed according to the CPU temperature.
Disabled Forces CPU fan to run at full speed.
Smart FAN Control Mode
Specifies how to control CPU fan speed. This item can not be configured if Smart FAN Control
Method is set to Disabled.
Auto Lets BIOS autodetect the type of CPU fan installed and sets the optimal CPU fan
control mode. (Default)
PWM Sets PWM mode for a 4-pin CPU fan.
(Note) Before setting this item to Intel(R) QST, make sure at least DDRII1 or DDRII2 socket in Channel
0 is populated. A small portion of system memory will be shared when Intel
®
QST is enabled.
To Next Page
Loading...
