Gigabyte GA-Q35M-S2 - Configuring S;PDIF Output; Setting Output Sampling Rate and Source

GA-Q35M-S2 Motherboard - 86 -
S/PDIF Coaxial Cable
S/PDIF Optical Cable
Step 3:
Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either
one) to an external decoder for transmitting the S/PDIF digital
audio signals.
B. Configuring S/PDIF out:
Click the tool icon in the DIGITAL section. In the
S/PDIF In/Out Settings dialog box, select an out-
put sampling rate and select (or disable) the output
source. Click OK to complete the configuration.